2.5L ZINSSER PERMAWHITE EXT SATIN WHITE W/BASED

Zinsser Perma White is an exterior paint ideal for most surfaces including wood, UPVC, stucco, brick, stone, concrete, and more. This extremely durable, tough finish is formulated to resist fading, peeling, cracking, and blistering. As well as being self-priming and recoatable after only 1 hour, it contains a biocide that protects against fungal degradation to keep your exterior looking newer for longer. This tough exterior paint has 15 years of performance and comes in satin and semi-gloss finishes. Non yellowing, Self priming, Fade-resistant, Contains a biocide to protect the dried coating against fungal degradation Area Exterior Recommended Use Exterior Wood, UPVC, stucco, brick, stone and concrete Coverage Up to 12mý per litre Drying Time 30 Minutes Re-Coat Time 1 Hour Recommended Coats 2 Coats Preparation, Always ensure the surface to be treated is clean, dry and free from any dust, grease, oil, wax, mould or possible contaminants that may interfere with adhesion. Remove all existing mould and mildew before painting, with a product such as Zinsser Mould Killer & Remover Scrape sand or brush any loose or flaking paint (always take special care when sanding or scraping the old surface, ensure to wear a suitable face covering to avoid inhalation.) Rust, tannin, grease, mould and mildew and other stains should be blocked with the appropriate stain killing primer-sealer such as Zinsser B-I-N Primer-Sealer Application Always test a small area to ensure you are happy with the finished results. Shake or stir well before use Apply with a synthetic brush, roller or sprayer. Only apply in temperatures between 10-32øC, avoid painting in direct sunlight or when rain is due. Once first coat has been applied leave to dry for 1 hour before applying a second coat. Paint will be fully cured in 7 days Note: Always follow the manufacturer instructions found on the tin.